How to Replace Sway Bar Links 02-06 Nissan Altima

Difficulty: Intermediate · About 35 min · Nissan Altima

Replace the sway bar links on a Nissan Altima, loosening both ends with a counterhold and checking that the new links sit without binding.

Steps

1. Raise and remove the wheel

   Loosen the lug nuts with the vehicle on the ground, lift and support it securely, then remove the wheel for access to the link.

2. Remove the worn link

   Apply penetrant to the link fasteners. Counterhold each stud with a wrench while removing the nuts, then withdraw the link from the sway bar and suspension arm.

3. Install the replacement link

   Position the new link and start both fasteners by hand. Tighten them evenly to the vehicle specification while ensuring the link is not twisted.

4. Reinstall the wheel and check

   Mount the wheel and snug the lug nuts. Lower the vehicle, torque the wheel fasteners to specification in a star pattern, and check for clunks on a short drive.

Check your vehicle’s repair manual for exact specifications and fit.