How to Replace Shock Absorber 99-04 Honda Odyssey

Difficulty: Intermediate · About 40 min · Honda Odyssey

Replace rear shock absorbers on a Honda Odyssey, supporting the vehicle securely and tightening the mounts evenly after fitting the new shocks.

Steps

1. Raise the vehicle and remove a wheel

   Loosen the lug nuts with the vehicle on the ground, raise and support it on stands, then remove the wheel to access the shock mount.

2. Remove the old shock

   Apply penetrant to the upper and lower fasteners. Remove the shock bolts and guide the unit out without damaging nearby brake or suspension lines.

3. Install the replacement shock

   Position the new shock and start its upper and lower fasteners by hand. Tighten both mounts to the vehicle specification, then reinstall the wheel.

4. Repeat and inspect

   Replace the shock on the opposite side using the same method. Torque both wheels to specification in a star pattern and check for secure mounts before driving.

Check your vehicle’s repair manual for exact specifications and fit.