How To Remove Front Bumper Cover 00-07 Ford Focus
Difficulty: Beginner · About 45 min · Ford Focus
Remove and reinstall the front bumper cover on a 2000–2007 Ford Focus to access lamps or front end components.
Tools you will need
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- T30 Driver
- 1/4 Inch Socket
- 7mm Socket
- 10mm Socket
- Ratchet
Steps
Remove the grille and upper shroud
Release the upper shroud clips and lift the shroud away. Remove the grille fasteners, release its side tabs carefully, and pull the grille forward from its opening.
Release bumper fasteners and intake hoses
Remove the lower bumper screws and the fasteners inside both wheel wells. Loosen the air intake hose clamps and mounting bolts, disconnect the hoses, then move the intake box clear as required for bumper access.
Remove the bumper cover
Twist the side marker bulb sockets free, release the side clips, and draw the bumper cover down and forward. Disconnect any attached wiring before setting it on a padded surface.
Reinstall and align the bumper
Reconnect the side marker sockets and position the cover on its locating tabs. Refit the intake hoses and box, reinstall wheel well and lower fasteners, then secure the grille and upper shroud clips.
Check your vehicle’s repair manual for exact specifications and fit.