How to Replace Door Speaker 09-19 Ford Fiesta
Difficulty: Intermediate · About 40 min · Ford Fiesta
Replace the door speaker on a 2009–2019 Ford Fiesta by removing the door trim, unplugging the speaker, and testing the audio before reinstalling the panel.
Tools you will need
- Flat Blade Screwdriver
- T20 Driver
- T25 Torx Driver
Parts and supplies
- Door speaker
Steps
Remove the door panel
Switch off the ignition. Release the trim covers and remove the T20 handle and panel fasteners, then unplug the door switches and detach the handle cable. Release the panel clips and lift the door panel away to expose the speaker.
Remove the original speaker
Unplug the speaker connector and remove its T25 mounting bolts. Lift the speaker from the door and compare its connector and mounting points with the replacement.
Install and connect the replacement
Position the new speaker in the door and reinstall its T25 fasteners. Reconnect the electrical plug until it locks, routing the wiring so it cannot touch the speaker cone or become trapped behind the panel.
Test audio and reinstall the panel
Turn on the audio system briefly and confirm the speaker plays without distortion. Switch the system off, reconnect the door wiring and handle cable, align the panel, and press its clips into place. Reinstall the screws, trim, and window crank if equipped.
Check your vehicle’s repair manual for exact specifications and fit.