How to Check Fluids 14-17 Subaru Crosstrek
Difficulty: Beginner · About 20 min · Subaru Crosstrek
Inspect brake fluid, washer fluid, engine oil, and coolant on a 2014–2017 Subaru Crosstrek, following the marked levels and checking the cooling system only when cold.
Tools you will need
- Flashlight
- Brake fluid
- Windshield washer fluid
- Engine oil
- Coolant
Steps
- Inspect brake fluid
Check that the brake fluid level is between the reservoir's minimum and maximum marks. Fluid should be clear to pale yellow; dark or cloudy fluid needs proper service.
- Check washer fluid
Remove the washer reservoir cap and confirm fluid is above the minimum mark. Refill with suitable windshield washer fluid and secure the cap.
- Read engine oil level
Park on level ground and switch the engine off. Wipe the dipstick clean, insert it completely, then pull it out to read the level; add the recommended oil gradually if necessary.
- Inspect coolant when cold
Wait until the engine is completely cool before opening any cooling-system cap. Check the radiator and overflow reservoir levels, then reinstall their caps securely.
Check your vehicle’s repair manual for exact specifications and fit.