How to Replace Window Regulator 03-04 Honda Odyssey
Difficulty: Intermediate · About 100 min · Honda Odyssey
Replace the front window regulator on a 2003–2004 Honda Odyssey, securing the glass and removing the control box and speaker to access the regulator and motor wiring.
Tools you will need
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- 10mm Wrench
- Painter's Tape
- 10mm Socket
- Ratchet
Parts and supplies
- Front power window regulator
Steps
Remove the door panel
Pry off the screw covers, remove the handle and pull screws, and disconnect the switch wiring. Release the latch rod, mirror trim, and panel clips, then lift the panel away and unplug the speaker.
Secure the glass and remove the regulator
Remove the control box and bracket, then peel back the water shield. Raise the glass and tape it in place, unplug the motor and wiring plate, remove the regulator bolts, and withdraw the assembly.
Install the replacement regulator
Position the replacement regulator and hang it by its upper bolt. Transfer the motor wiring plate, install the remaining fasteners, lower the glass onto the track, and secure its mounting bolts.
Test and reassemble the door
Reconnect the switch and test the window with the ignition on, then turn the ignition off. Restore the water shield and control box, reconnect the speaker and latch components, and refit the panel and trim.
Check your vehicle’s repair manual for exact specifications and fit.