How to Change Engine Oil 03-11 Honda Element

Difficulty: Beginner · About 30 min · Honda Element

Change the engine oil and filter on a Honda Element, using the specified oil quantity and checking the level and drain area afterward.

Steps

1. Remove the oil filter

   Warm the engine briefly, switch it off, and place a drain pan beneath the filter. Loosen the old filter with a filter wrench and wipe the mounting surface clean.

2. Drain the used oil

   Raise and support the vehicle on approved stands. Place the pan under the oil pan, remove the drain plug, and let the oil drain fully before reinstalling the plug to specification.

3. Install the new filter

   Lightly coat the new filter gasket with fresh oil. Thread the filter onto its mount and tighten according to the filter maker's instructions.

4. Refill and verify

   Add the oil grade and amount specified in the owner's manual. Start the engine briefly, shut it off, inspect for leaks, wait a moment, and check the dipstick level.

Check your vehicle’s repair manual for exact specifications and fit.