How to Replace Front Power Window Motor 93-97 Dodge Intrepid
Difficulty: Intermediate · About 100 min · Dodge Intrepid
Replace the front power window motor on a 1993–1997 Dodge Intrepid by removing the door panel and regulator, transferring the motor, and carefully reconnecting the balancing spring.
Tools you will need
- Socket Extensions
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- 10mm Wrench
- 10mm Socket
- Ratchet
- Needle nose pliers
Parts and supplies
- Front power window motor
Steps
Disconnect the battery and remove the panel
Disconnect the negative battery cable. Remove the speaker cover and speaker, then remove the panel screws, release the clips, disconnect the lock rods, and lift the door panel away.
Secure the glass and remove the regulator
Raise the window and carefully relieve the balancing spring tension with pliers. Remove the window track and regulator fasteners, disconnect the motor lead, detach the glass from the regulator, and withdraw the assembly.
Transfer the motor
Remove the motor fasteners and separate it from the regulator. Fit the replacement motor into its bracket, align the drive, and secure it with the fasteners.
Reinstall regulator and spring
Feed the regulator into the door and loosely hang it on its fastener. Reconnect the motor and switch wiring, operate it briefly to position the mechanism as directed, then secure the glass and carefully restore the balancing spring.
Reinstall the door panel and test
Reconnect the lock rods, speaker, and panel wiring. Align and secure the panel, reinstall the speaker and trim screws, reconnect the battery, and test the window for smooth travel.
Check your vehicle’s repair manual for exact specifications and fit.