How to Replace Inside Rear Door Handle 01-04 Nissan Frontier
Difficulty: Beginner · About 25 min · Nissan Frontier
Replace the inside rear door handle on a 2001–2004 Nissan Frontier by lifting the door panel, transferring the lock rod, and reinstalling the moisture barrier.
Tools you will need
- Flat Blade Screwdriver
- Phillips Head Screwdriver
Parts and supplies
- Inside rear door handle
Steps
Remove the rear door panel
Switch off the ignition. Remove the two door-pull screws and the screw behind the handle bezel. Release the bezel and panel clips, lift the panel upward, unplug the window switch, and peel the water shield back carefully.
Remove the old handle
Pull the handle from its opening and disconnect the door-lock rod. Inspect the rod clip and handle mounting points for damage before fitting the replacement.
Install the replacement handle
Reconnect the lock rod to the new handle and seat the handle fully in its opening. Move the handle to confirm the rod actuates the lock without binding.
Refit the water shield and trim
Press the water shield back into place, reconnect the window-switch harness, and lift the panel onto the door. Seat the clips and reinstall the door-pull and handle screws, then check the lock and handle before closing the door.
Check your vehicle’s repair manual for exact specifications and fit.