How to Replace Tail Light 01-06 Chrysler Sebring

Difficulty: Beginner · About 15 min · Chrysler Sebring

Replace the tail light and bulbs on a 2001-2006 Chrysler Sebring.

Steps

1. Remove the tail light

   Open the trunk, pull down the trunk carpet, disconnect the wiring harness, twist off the three plastic wing nuts, pull the light out, then disconnect its wiring connector.

2. Service the bulbs

   Twist out the bulb sockets, pull the bulbs out, push the new ones in, then twist the sockets back into the light.

3. Install the tail light

   Plug in the wiring connector, push the light into place, fasten the three plastic wing nuts, connect the wiring harness, push the trunk carpet back into place, then close the trunk.

Check your vehicle’s repair manual for exact specifications and fit.