How To Replace Front Power Window Motor 98-02 Lincoln Town Car
Difficulty: Intermediate · About 70 min · Lincoln Town Car
Replace the front power window motor on a 1998–2002 Lincoln Town Car by removing the door trim, separating the motor from the actuator, and testing the window after reassembly.
Tools you will need
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- T30 Driver
Parts and supplies
- Front power window motor
Steps
Remove the door panel
Unscrew the lock knob and remove the pull handle and panel fasteners. Pry up the switch panel, unplug it, release the door panel clips, disconnect remaining wiring, and peel back the water shield.
Remove the window motor
Unplug the motor wiring connector and remove its T30 fasteners. Support the assembly as you remove the final motor-to-actuator screw, then take the motor out through the door opening.
Install the replacement motor
Attach the new motor to the window actuator, then feed the assembly back into the door. Secure it with the T30 screws and reconnect the electrical connector.
Reassemble the door and test
Restore the water shield and reconnect all wiring. Align the door panel and clips, reinstall the switch panel, pull handle, and lock knob, then cycle the window to confirm operation.
Check your vehicle’s repair manual for exact specifications and fit.