How to Replace Window Regulator 01-05 Honda Civic
Difficulty: Intermediate · About 55 min · Honda Civic
Replace a Honda Civic window regulator while supporting the glass, checking motor travel, and reconnecting the door lock and switch wiring.
Tools you will need
- 10mm Socket
- Ratchet
- Phillips Head Screwdriver
- Duct Tape
Parts and supplies
- Window regulator
Steps
Remove the door panel
Release the handle and pull trim, disconnect the switch harnesses, and remove the exposed screws. Free the panel clips and lift the panel away from the door.
Remove the regulator
Unplug the motor and support the glass before loosening its retainers. Remove the regulator and motor fasteners, then guide the assembly out through the door opening.
Install and test the regulator
Position the replacement, start its fasteners by hand, and reconnect the motor. Temporarily connect the switch and test movement, then disconnect power before seating and fastening the glass.
Reassemble the door
Confirm the glass runs smoothly, reconnect the door lock and window switch, and align the panel clips. Reinstall the screws, handle trim, and switch panel.
Check your vehicle’s repair manual for exact specifications and fit.