How to Replace Fog Light Assembly 99-04 Nissan Pathfinder
Difficulty: Beginner · About 20 min · Nissan Pathfinder
Replace a fog light assembly on a 1999–2004 Nissan Pathfinder by releasing its bumper trim, disconnecting the lamp, and securing the replacement on its locating tabs.
Tools you will need
- 10mm socket and ratchet
- Flat blade screwdriver
Parts and supplies
- Fog light assembly
Steps
- Remove the fog light trim
Pry the trim piece from the bumper carefully to expose the lamp fasteners. Keep the clip intact and set the trim aside for reinstallation.
- Remove the old lamp
Remove the two 10mm bolts and slide the assembly toward the center of the bumper. Pull it forward from its opening, then disconnect the electrical plug.
- Install the replacement lamp
Connect the harness to the new fog light and guide the assembly into the bumper using its locating tabs. Reinstall both bolts and press the trim piece back into its clips.
- Test the fog light
Switch on the fog lights and confirm the new assembly illuminates. Check that the lamp is secure and the trim is seated evenly.
Check your vehicle’s repair manual for exact specifications and fit.