How to Remove Front Bumper 11-18 Volkswagen Jetta
Difficulty: Intermediate · About 3 min · Volkswagen Jetta
Remove and reinstall the front bumper cover on a 2011–2018 Volkswagen Jetta, releasing its Torx fasteners and fog lamps and aligning the cover with both side guides.
Tools you will need
- T25 Torx Driver
- T30 Driver
- Trim Tool Set
Steps
Remove the bumper fasteners
Park safely and remove the upper, lower, and wheel-well Torx screws securing the cover. Peel back any liner tape carefully so it can be restored during assembly.
Release the cover and lamps
Pull the cover corners from their side guides with a helper supporting it. Twist out the fog-lamp bulbs or disconnect their plugs, then set the cover on a padded surface.
Align and reconnect
Reconnect or reinstall the fog lamps and bring the cover into position. Engage both side guides and upper brackets before installing the fasteners.
Secure and inspect
Reinstall the wheel-well, lower, and upper screws, then restore the liner tape. Check panel gaps and confirm lamps work and the cover is firmly held.
Check your vehicle’s repair manual for exact specifications and fit.