How To Install Replace Windshield Wiper Motor 1998-03 Ford Escort ZX2
Difficulty: Intermediate · About 4 min · Ford Escort Zx2
Replace the windshield wiper motor on a 1998–2003 Ford Escort ZX2 by marking arm positions, resetting the motor to park, and testing the sweep before driving.
Tools you will need
- 13mm Socket
- Flat Blade Screwdriver
- T15 Torx Driver
- Phillips Head Screwdriver
- 10mm Socket
- Ratchet
Parts and supplies
- Compatible windshield wiper motor
Steps
Mark and remove the wiper arms
Open the hood and mark each blade's parked position on the glass with tape. Remove the arm nuts and lift the arms from their splines.
Remove cowl and motor cover
Release the cowl screw covers and fasteners, then lift the cowl away. Remove the wiper-motor cover to expose the motor and linkage.
Disconnect and remove the motor
Disconnect the negative battery cable, unplug the motor, and remove its mounting bolts. Separate the motor arm from the transmission without bending the linkage.
Install and reset the replacement
Transfer the motor arm to the replacement in the same orientation. Install the motor, reconnect its plug and battery, then run the wipers once to establish park position.
Refit arms and test
Reinstall the motor cover and cowl, then align the arms with the tape marks. Tighten their nuts and test washer and wiper operation through a full sweep.
Check your vehicle’s repair manual for exact specifications and fit.