How to Replace Rear Shocks 08-16 Nissan Rogue

Difficulty: Intermediate · About 35 min · Nissan Rogue

Replace rear shock absorbers on a Nissan Rogue, supporting the suspension to align the mounts and confirming both sides are secure.

Steps

1. Lift the vehicle and remove the wheel

   Loosen the lug nuts while the tire is on the ground, raise the vehicle, and support it safely. Remove the wheel to reach the shock fasteners.

2. Remove the shock

   Support the suspension with a floor jack, remove the lower shock nut and bolt, then remove the upper bolt. Lower the shock out of its mounting points.

3. Install the replacement shock

   Position the new shock and start the upper bolt by hand. Raise or lower the suspension slightly to align the lower mount, then install its bolt and nut.

4. Reinstall the wheel

   Tighten the shock hardware to vehicle specifications, remove the support jack, and refit the wheel. Torque the lug nuts to specification in a crossing pattern.

Check your vehicle’s repair manual for exact specifications and fit.