How to Replace Interior Door Handle 99-04 GMC Sonoma
Difficulty: Beginner · About 60 min · Gmc Sonoma
Replace an interior door handle on a 1999–2004 GMC Sonoma by removing the door trim and transferring the water shield. Reconnect the latch rods securely and test the handle and lock before reinstalling the panel.
Tools you will need
- Flat blade screwdriver
- Phillips head screwdriver
- 7mm socket
- Ratchet
- Door panel removal tool
Parts and supplies
- Interior door handle
Steps
Remove the door panel
Pry up the window-switch panel and disconnect its plugs. Remove the handle and door-pull fasteners, release the panel clips, and lift the panel away from the door.
Remove the old handle
Pry the handle from its opening and slide it free. Unclip both latch rods carefully, noting which rod fits each handle lever.
Install the replacement handle
Transfer the water shield to the new handle and reconnect each latch rod to the matching clip. Seat the handle in the panel and confirm both rods are retained.
Reassemble and test the door
Lift the panel into position and press its clips into the door. Reinstall screws and trim, reconnect the switch wiring, and test the inside handle, lock, and window.
Check your vehicle’s repair manual for exact specifications and fit.