How To Replace Front Window Regulator 96-00 Honda Civic
Difficulty: Intermediate · About 90 min · Honda Civic
Replace the front window regulator on a 1996–2000 Honda Civic, securing the glass and disconnecting the door trim and wiring before changing the regulator assembly.
Tools you will need
- Socket Extensions
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- Painter's Tape
- 10mm Socket
- Ratchet
Parts and supplies
- Front power window regulator
Steps
Remove the door panel and water shield
Remove the inner handle screw and release the latch rod. Unclip the mirror trim, pull handle, and switch panel, disconnect their wiring, then release the panel and speaker before peeling back the water shield.
Free the window and old regulator
Support the glass before loosening its track bolts, then tape it securely in the raised position. Unplug the motor, remove the regulator and motor fasteners, and maneuver the assembly out through the door.
Fit the new regulator
Feed the replacement into the door and loosely start its motor and regulator fasteners. Reconnect and secure the wiring, lower the glass onto the track, and reinstall the track bolts.
Test the window and reinstall trim
Cycle the window to check that it moves freely and remains aligned. Reconnect the speaker, switch, lock, and latch components, then refit the water shield, door panel, screws, and trim pieces.
Check your vehicle’s repair manual for exact specifications and fit.