How To Replace Front Brakes 90-97 Honda Accord
Difficulty: Beginner · About 45 min · Honda Accord
Replace the front brake pads on a 1990–97 Honda Accord, checking the caliper pins and tightening the bracket hardware to vehicle specification.
Tools you will need
- Floor jack
- Jack stands
- 21 mm socket
- 14 mm socket
- 17 mm socket
- C-clamp
- Wire tie
- Torque wrench
Parts and supplies
- Front brake pads
Steps
Raise the vehicle and remove the wheel
Remove the center cap and loosen lug nuts with the car on level ground. Raise and support the front safely, then remove the wheel.
Remove the caliper
Remove the caliper bolts and secure the caliper with a wire tie. Keep the brake hose relaxed and avoid letting the caliper hang from it.
Remove the old pads
Remove the caliper bracket fasteners and pads. Inspect the caliper pins and boots for free movement, corrosion, or damage before reassembly.
Install new pads
Reinstall the bracket and tighten it to the vehicle's specification. Seat the replacement pads in the bracket, compress the caliper piston with a clamp, and refit the caliper.
Reinstall the wheel and verify
Mount the wheel and torque its lug nuts to specification in a star pattern. Pump the brake pedal until firm and test braking in a clear area at low speed.
Check your vehicle’s repair manual for exact specifications and fit.