How to Replace Front Door Speakers 01 Ford Ranger
Difficulty: Beginner · About 30 min · Ford Ranger
Replace the front door speaker on a 2001 Ford Ranger by removing the door panel, reconnecting the speaker harness, and securing the panel and handle trim.
Tools you will need
- 6mm socket and ratchet
- Phillips screwdriver
- Flat blade screwdriver
Parts and supplies
- Front door speaker
Steps
- Remove the door panel
Remove the door-pull screws and lift the handle panel away, disconnecting its harnesses. Remove the remaining panel screws and lift the panel clear of the door.
- Remove the old speaker
Remove the four 6mm speaker fasteners and pull the speaker from its opening. Disconnect the wiring plug and inspect it before fitting the replacement.
- Install the new speaker
Connect the harness to the replacement speaker and position it in the door. Reinstall and snug the four 6mm screws evenly.
- Reassemble and test audio
Hang the door panel in its slots and press it into place. Reinstall the panel screws, reconnect the handle wiring, secure the handle trim, and test sound from the new speaker.
Check your vehicle’s repair manual for exact specifications and fit.