How To Replace Rear Wiper Arm Mounting Nut Cap 2009-2017 Volkswagen Tiguan
Difficulty: Beginner · About 5 min · Volkswagen Tiguan
Replace the small rear-wiper arm mounting-nut cap on a 2009–2017 Volkswagen Tiguan. This cover protects the exposed retaining nut; confirm the replacement matches the wiper-arm shape before pressing it into place.
Tools you will need
- Small trim tool or plastic pick
- Clean cloth
Parts and supplies
- Rear wiper arm mounting-nut cover cap matched to the Tiguan
Steps
Inspect the wiper arm
Park the rear wiper in its resting position and check that the arm and retaining nut are secure. Confirm the replacement cap matches the Tiguan's arm and does not require removal of the wiper arm itself.
Remove the damaged cap
Use a plastic pick or trim tool to lift the old cap from the arm without scratching the paint or levering against the rear glass. Wipe dirt from the cap seat and nut area.
Fit and check the new cap
Align the new cover with the arm's molded seat and press it on evenly until retained. Confirm the cover sits flush and does not obstruct the wiper's movement across the glass.
Check your vehicle’s repair manual for exact specifications and fit.