How to Replace Front Grille 11-18 Volkswagen Jetta
Difficulty: Intermediate · About 4 min · Volkswagen Jetta
Replace the front grille on a 2011–2018 Volkswagen Jetta by loosening the bumper cover, releasing the grille tabs, and confirming fog lamps and trim are restored afterward.
Tools you will need
- T25 Torx Driver
- T30 Driver
- Ratchet
- Trim Tool Set
Parts and supplies
- Replacement front grille
Steps
Loosen the bumper cover
Park safely and remove the upper, lower, and wheel-well Torx fasteners that retain the bumper cover. Release the liner tape carefully so the cover edges can move without tearing.
Remove the grille
Pull the cover forward from its side guides with a helper supporting it. Twist out fog-lamp bulbs or disconnect their plugs, then release the grille's lower tabs and lift it free.
Install the replacement grille
Align the grille clips with their slots and press around the perimeter until each tab locks. Check that the grille sits flush and does not obstruct any lamp or sensor.
Secure the bumper and lamps
Reconnect or reinstall the fog lamps, seat the bumper in its guides, and reinstall the upper, lower, and wheel-well fasteners. Check panel gaps and verify lamps work.
Check your vehicle’s repair manual for exact specifications and fit.