How to Replace Hood Latch 05-11 Honda Civic
Difficulty: Intermediate · About 35 min · Honda Civic
Replace the hood latch on a 2005–2011 Honda Civic, transferring the release cable and electrical connector before aligning the latch for reliable closure.
Tools you will need
- 10 mm socket and ratchet
- Trim or pick tool
- Flat blade screwdriver
Parts and supplies
- Hood latch assembly
Steps
Remove the air guide
Open and securely support the hood. Release the air-guide push clips with a trim tool, disengage the guide from the grille lip, and lift it away without breaking its side tabs.
Disconnect the old latch
Mark the latch position on its support before loosening the fasteners. Unplug the electrical connector, release the hood cable end from the latch lever, and remove the latch.
Transfer the cable and fit the latch
Attach the cable end to the replacement latch and reconnect the electrical plug. Position the assembly at the marked location and start its fasteners by hand before tightening securely.
Reinstall the air guide
Slide the guide back over its supports and engage its grille and side edges. Reinstall all push clips and make sure the guide is not trapped under the latch.
Verify hood release and closure
Before closing the hood, operate the release lever and confirm the latch moves freely. Lower the hood gently and verify it catches securely; adjust alignment if needed before driving.
Check your vehicle’s repair manual for exact specifications and fit.