How to Replace Camshaft Position Sensor 02-09 Toyota Camry
Difficulty: Beginner · About 30 min · Toyota Camry
Replace the camshaft position sensor on a 2002–2009 Toyota Camry by removing the air intake for access and routing the replacement connector as originally installed.
Tools you will need
- 10mm socket and extensions
- Ratchet
- Needle nose pliers
Parts and supplies
- Camshaft position sensor
Steps
Remove the air intake assembly
Disconnect the air box sensors and loosen the intake hose clamp. Remove the air box fasteners and lift out the air filter and housing to access the sensor.
Remove the old sensor
Unplug the sensor connector and release its harness from nearby retainers. Remove the 10mm mounting bolt and withdraw the sensor from its opening.
Install the replacement sensor
Inspect the sensor seal and opening, then insert the replacement in the same orientation. Reinstall its mounting bolt to the vehicle's specification and reconnect the plug.
Reinstall the air intake
Return the air box and air filter to position and secure the housing. Reconnect the intake tube and tighten its clamp, then reconnect the air box sensors.
Verify the repair
Start the engine and check for warning lights or abnormal running. Confirm all intake connections and sensor plugs are secure.
Check your vehicle’s repair manual for exact specifications and fit.