How to Replace Fog Lights 93-99 Volkswagen Jetta

Difficulty: Intermediate · About 35 min · Volkswagen Jetta

Replace a fog-light assembly on a 1993–1999 Volkswagen Jetta by removing its access cover, mounting bolts, and electrical connector.

Steps

1. Remove the access cover

   Switch off the lights and ignition, then carefully pry off the small fog-light cover. Keep the tool against the cover edge to avoid scratching the bumper.

2. Release the mounting hardware

   Remove the two small mounting fasteners behind the cover. If a retaining nut turns with a bolt, hold it with a suitable wrench while loosening the fastener.

3. Disconnect the old lamp

   Release the electrical connector tabs and unplug the fog light. Support the lamp as it comes free so it does not fall or strain the wiring.

4. Fit the replacement lamp

   Install suitable retaining clips if the original hardware is missing, then connect the replacement lamp. Position it squarely, secure its fasteners, and reinstall the access cover.

5. Test the fog light

   Turn on the fog lights and confirm the lamp illuminates. Check that the assembly is secure and aligned with the opposite side.

Check your vehicle’s repair manual for exact specifications and fit.