How To Replace Taillights 00-04 Ford Focus 3 Door
Difficulty: Beginner · About 25 min · Ford Focus
Replace a rear taillight assembly on a 2000–2004 three-door Ford Focus by opening the hatch, disconnecting the lamp, and securing the replacement with both fasteners.
Tools you will need
- Phillips screwdriver
Parts and supplies
- Rear taillight assembly
Steps
- Remove the old taillight
Open the hatch and remove the Phillips fastener at the lamp edge. From inside the trunk, unscrew the hand-operated retainer, then disconnect the bulbs and wiring harness and lift the lamp away.
- Install the replacement assembly
Reconnect the bulbs and wiring to the new housing. Align the lamp with its opening, start the inner thumb retainer and outer Phillips screw, and tighten them securely.
- Verify rear lamp operation
Test the tail, brake, and turn signal lights before closing the hatch. Confirm the assembly sits flush and the wiring is not trapped behind it.
Check your vehicle’s repair manual for exact specifications and fit.