How to Replace Rear Window Washer Nozzle 02-10 Ford Explorer
Difficulty: Beginner · About 30 min · Ford Explorer
Replace the rear window washer nozzle on a 2002–2010 Ford Explorer by removing the third brake light lens and reconnecting the washer hose.
Tools you will need
- Phillips screwdriver
- Flat blade screwdriver
- Gloves
Parts and supplies
- Rear window washer nozzle
Steps
- Remove the brake light lens
Remove the two Phillips screws securing the third brake light and carefully lift the lens away. Disconnect its wiring and the washer hose, keeping the hose from falling into the hatch.
- Remove the old nozzle
Release the washer nozzle retainers with a flat screwdriver and push the nozzle out of the brake light housing. Note the sprayer's orientation before removal.
- Install the new nozzle
Position the replacement nozzle with its spray outlet aimed toward the glass and press it into the housing until the clips lock. Reconnect the washer hose and brake light wiring.
- Refit and test
Reinstall the lens and its two screws. Operate the rear washer and confirm the spray reaches the glass without leaking at the hose connection.
Check your vehicle’s repair manual for exact specifications and fit.