How to Replace Headlights 03-07 Honda Accord
Difficulty: Intermediate · About 60 min · Honda Accord
Replace a headlight assembly on a 2003–2007 Honda Accord by releasing the bumper cover, transferring the bulbs, and setting the new lamp securely.
Tools you will need
- 10 mm socket and ratchet
- Plastic fastener remover
- Phillips screwdriver
- Painter’s tape
Parts and supplies
- Compatible headlight assembly and bulbs if required
Steps
Remove the bumper cover
Protect the bumper edges and release the upper and lower shrouds, fender screws, and grille-area fasteners. Free the clips below the headlights and support the cover as it comes away.
Remove the old headlight
Remove the upper and side lamp fasteners, then lift the headlight from its bracket. Twist out the bulb sockets and release the wiring retainer before setting the housing aside.
Prepare the replacement
Attach the mounting bracket and reconnect compatible bulbs to their plugs. Make sure each socket is locked and that the side-marker bulb and harness are present.
Install the headlight
Position the assembly in the body and start its fasteners by hand. Reinstall the retaining clip and secure the bracket evenly before refitting the bumper cover.
Reinstall and check aim
Align the bumper cover’s top tabs, then engage the side and lower retainers and reinstall both shrouds. Test all headlamp and marker functions and verify aim using the service procedure.
Check your vehicle’s repair manual for exact specifications and fit.