How To Replace Front Bumper Cover 93-98 Jeep Grand Cherokee
Difficulty: Beginner · About 4 min · Jeep Grand Cherokee
Remove and reinstall the front bumper cover on a 1993–1998 Jeep Grand Cherokee, moving the grille and lamps first and restoring each bulb socket and retaining clip.
Tools you will need
- Phillips Head Screwdriver
- 10mm Socket
- Ratchet
- T25 Torx Socket
Steps
Remove the grille and lamps
Open the hood and remove the grille screws. Lift the grille away, then unplug the headlamps and remove the marker and parking lamp fasteners.
Release the bumper cover
Remove the upper, wheel-well, and lower push clips. Pull the cover forward evenly and set it aside without stretching nearby wiring.
Refit the bumper cover
Align the cover with its guides and tuck the inner fenders behind it. Reinstall the top, bottom, and wheel-well retainers.
Reconnect lamps and grille
Reconnect headlamp plugs and reinstall marker and parking lamps with their sockets and fasteners. Align the grille tabs, reinstall its screws, and test the lights.
Check your vehicle’s repair manual for exact specifications and fit.