How to Replace Window Sweep 94-02 Dodge Ram 1500

Difficulty: Beginner · About 15 min · Dodge Ram 1500

Replace the inner and outer window sweeps on a Dodge Ram to reduce water entry and keep dirt from reaching the window regulator.

Steps

1. Remove the old sweeps

   Lower the window and use a trim-safe belt molding tool to lift the outer sweep from its channel. Pull the inner sweep upward and out of the door.

2. Install the inner sweep

   Orient the replacement to match the original and slide the inner sweep into its channel. Press it down evenly along the full length until seated.

3. Fit the outer sweep

   Align the outer sweep channel with the door edge and press it into position. Tap gently along its length with a non-marring tool, then check that it sits flush.

Check your vehicle’s repair manual for exact specifications and fit.