How To Install Replace Master Power Window Switch Honda Accord 94-97 1AAuto.com

Difficulty: Beginner · About 25 min · Honda Accord

Replace the master power window switch on a 1994–1997 Honda Accord and reconnect its wiring before reinstalling the door pull panel.

Steps

1. Remove the door pull panel

   Remove the Phillips screw securing the door pull trim and lift the panel from its clips. Unplug the switch wiring connector before moving the panel away from the door.

2. Replace the master switch

   Remove the three screws holding the window switch to its bezel and lift the switch out. Position the replacement switch in the same orientation and secure it with the screws.

3. Reconnect and reinstall the panel

   Reconnect the wiring plug and align the bezel with the door panel opening. Press the panel into place and reinstall the retaining screw in the door pull.

4. Test window operation

   Operate each window control and confirm all windows respond smoothly. Check that the panel is secure and no wiring is pinched before closing the door.

Check your vehicle’s repair manual for exact specifications and fit.