How To Replace Rear Door Handle 04-09 Dodge Durango
Difficulty: Beginner · About 55 min · Dodge Durango
Replace a rear exterior door handle on a 2004–2009 Dodge Durango by removing the rear door trim, transferring the lock rod, and testing the latch before closing the door.
Tools you will need
- Ratchet
- 8mm Wrench
- 8mm Socket
- Phillips Head Screwdriver
- Putty Knife
- Door Panel Removal Tool
- Flat Blade Screwdriver
Parts and supplies
- Rear exterior door handle
Steps
Remove the rear door panel
Pry off the handle trim and remove its screw and the lower panel screws. Release the clips with a panel tool, lift the panel away, then disconnect the lock rod and window wiring.
Remove the exterior handle
Peel back the water shield carefully and release the lock rod from the handle. Remove the two 8 mm retaining nuts, then pull the handle outward from the door skin.
Transfer the lock rod and fit the handle
Release the lock rod from the old handle and attach it to the replacement handle. Position the handle in the door, install its retaining nuts, and reconnect the rod clips.
Restore the trim and check operation
Press the water shield back into place and reconnect the window wiring and door lock rod. Align the panel, secure its clips and screws, reinstall the trim, and test both the handle and lock.
Check your vehicle’s repair manual for exact specifications and fit.