How to Replace Windshield Wiper Switch 95-02 Honda Accord

Difficulty: Intermediate · About 35 min · Honda Accord

Replace the windshield-wiper switch on a 1995–2002 Honda Accord by disconnecting the battery and opening the steering-column trim.

Steps

1. Disconnect the battery

   Turn the ignition off and disconnect the negative battery terminal. Wait as directed by the service manual before working around steering-column wiring.

2. Remove the column trim

   Remove the Phillips screws from the steering-column covers and carefully separate the upper and lower trim pieces. Turn the steering wheel as needed to access the switch fasteners.

3. Replace the wiper switch

   Release the switch tab, remove its screws, and unplug the wiring connector. Fit the replacement switch, reconnect the plug, and secure the switch to the column.

4. Reassemble and test

   Snap the column trim together and reinstall its screws. Reconnect the battery and test each wiper speed and washer control before driving in rain.

Check your vehicle’s repair manual for exact specifications and fit.