How to Check and Fill Fluids 10-17 GMC Terrain
Difficulty: Beginner · About 45 min · Gmc Terrain
Check engine oil, washer fluid, coolant, and brake fluid levels on a 2010–2017 GMC Terrain, allowing the engine to cool before inspecting coolant and following the correct fluid specifications.
Tools you will need
- Windshield Washer Fluid
- Brake Fluid
- Cloth Rags
- Anti-Freeze
- Engine Oil
Parts and supplies
- Engine oil
- Windshield washer fluid
- Dex-Cool coolant
- Brake fluid
Steps
- Check the engine oil
With the vehicle on level ground, remove the dipstick, wipe it clean, fully reinsert it, and check the level again. Add the specified oil gradually if needed, then reinstall the dipstick and filler cap securely.
- Check the washer-fluid reservoir
Remove the washer reservoir cap and check the level. Add suitable washer fluid without overfilling, then secure the cap and confirm the spray nozzles are clear.
- Inspect coolant only when the engine is cool
Wait until the engine is fully cool before opening the pressurized coolant reservoir. Check the level against the cold mark and add the specified coolant mixture only if it is low, then tighten the cap securely.
- Check the brake-fluid level and condition
Remove the reservoir cap carefully and compare the fluid with the minimum and maximum marks. If the level is low or the fluid appears dark, investigate for wear or leaks and follow the specified service procedure rather than simply topping off without diagnosis.
Check your vehicle’s repair manual for exact specifications and fit.