How to Replace 06-08 Dodge Ram 1500 Grille
Difficulty: Beginner · About 2 min · Dodge Ram
Replace the grille on a 2006–2008 Dodge Ram 1500 and transfer its emblem if needed, protecting the hood and grille surface while tightening the retaining nuts.
Tools you will need
- 8mm Socket
- Ratchet
- Flat Blade Screwdriver
- Channel-Lock Pliers
- Razor Blade / Gasket Scraper
Parts and supplies
- Replacement grille, if needed
- Double-sided emblem tape, if required
Steps
Remove the grille
Open and secure the hood, then remove the upper grille nuts. If a stud spins, hold it gently with locking pliers while removing the nut, then lift the grille away.
Transfer the emblem
Release the emblem tabs carefully from the old grille. Remove old tape residue from the emblem without scratching its face or damaging the retaining clips.
Attach the emblem to the new grille
Apply suitable double-sided automotive trim tape to the emblem's back if required. Align the emblem with the grille and press it firmly into place.
Install the grille
Clean the mounting area and lower the grille onto its locating points. Reinstall the retaining nuts evenly, then close the hood and verify the grille sits flush.
Check your vehicle’s repair manual for exact specifications and fit.