How To Replace Side Rear View Mirror 98-02 Honda Accord
Difficulty: Intermediate · About 60 min · Honda Accord
Replace a side rear-view mirror on a 1998–2002 Honda Accord by removing the door panel and transferring defrost wiring to the replacement mirror.
Tools you will need
- 8mm socket and wrench
- Ratchet
- Flat blade screwdriver
- Phillips screwdriver
Parts and supplies
- Side rear-view mirror
Steps
Remove the door panel
Release the mirror sail trim and remove the door pull screws. Lift the switch panel and unplug its harness, then lift the panel off and disconnect the latch, lock, and remaining wiring.
Disconnect and remove the mirror
Unplug the mirror defroster connector if equipped. Support the mirror from outside while removing the 8mm mounting fasteners, then guide the mirror from the door.
Install the replacement mirror
Feed the mirror wiring through the opening and position the mirror on the door. Reinstall and secure the 8mm fasteners, then reconnect the defroster and adjustment wiring.
Reinstall the door panel
Reconnect the door latch and lock cables and panel wiring. Align the panel, engage its clips, reinstall the switch panel and door pull screws, and refit the sail trim.
Test the mirror
Test power adjustment and defrost if equipped. Check that the mirror is secure and the door panel is seated evenly.
Check your vehicle’s repair manual for exact specifications and fit.