How to Replace Mirror 97-99 Toyota 4Runner
Difficulty: Intermediate · About 45 min · Toyota 4runner
Replace the side mirror on a 1997–1999 Toyota 4Runner by removing the door panel and speaker, transferring the mirror wiring, and restoring the water shield.
Tools you will need
- 10mm Wrench
- Phillips Head Screwdriver
- 10mm Socket
- Ratchet
- Putty Knife
- Flat Blade Screwdriver
Parts and supplies
- Side mirror assembly
Steps
Remove the door panel
Switch off the ignition and disconnect the window and lock wiring. Remove the door-pull screws and panel pins, release the interior handle rod, and lift the panel upward. Peel the water shield back carefully to preserve it.
Unplug the speaker and remove the mirror
Release the mirror-base trim and move the water shield aside. Unplug the speaker lead and free its wiring clip, then remove the speaker fastener. Remove the three mirror mounting bolts and lift the mirror out of its locating clip.
Install the replacement mirror
Seat the new mirror in its locating clip and reinstall the three mounting bolts. Secure the speaker wiring in its door clip, reconnect the speaker lead, and refit the mirror-base trim and water shield.
Reinstall the panel and test
Reconnect the lock, window, and handle linkages, then hang the panel on the door and press the clips into place. Reinstall the screws and trim, reconnect the speaker, and verify mirror adjustment and all door functions before closing it.
Check your vehicle’s repair manual for exact specifications and fit.