How to Replace Master Window Switch 02-06 Toyota Camry
Difficulty: Beginner · About 15 min · Toyota Camry
Replace the master window switch on a 2002–2006 Toyota Camry by removing the pull-handle cover and reconnecting the switch harness.
Tools you will need
- Phillips screwdriver
- Flat blade screwdriver
Parts and supplies
- Master power-window switch
Steps
Open the door-pull access
Switch off the ignition and carefully pry the small cover from the door pull. Remove its screw and lift the switch panel enough to access the electrical plug.
Remove the old switch
Release the window-switch connector and remove the switch fasteners from the panel. Lift the old switch out without bending its plastic mounting tabs.
Install the replacement
Seat the new switch in the panel and reinstall its retaining screws. Reconnect the harness, ensuring the plug lock is fully engaged.
Close and test
Reinstall the panel in the pull handle and secure it with the screw and cover. Turn on the ignition and test the power-window controls.
Check your vehicle’s repair manual for exact specifications and fit.